Double Spindle Series

TS-6/8/10-DIIY

Dual Spindle Dual Y-axis Power Turret CNC Lathe

Power tool with single drive mechanism can bemounted in all positions Maximum torque of25Nm for heavy-duty cutting Increasec number of tools,2nd turret that can be equipped with. The number of tool mountingfaces has been increased to 8 from 6on previous models.In addition,a double planetool holder can be mounted,allowingasignificant increase in thenumber oftools tobemountedIn addition,up to 4 powerhead tool holders can be installed. The 1st turret and 2nd turret can machine both the 1st spindle and 2nd spindle simultaneously,allowingfor higher machining efficiency. Can cope with complex shape machining bythe Y-axis function of theturret. Bv overlappine control of the 2nd spindles movement command.which can move in the X/Z direction. with the 1st turret's axis movement commandmachining time can be significantlyreduced.

product Consulting

TS-8/10-DII(DIIP)

8/10 Inch Dual Spindle Dual Power Turret CNC Lathe

Power tool with single drive mechanism can be mounted in all positions Maximum torque of25Nm for heavy-duty cuttingIncreased number oftools,2ndturretthatcan beequippedwith The number oftool mounting faces has been increased to 8 from 6 on previous models In additiona double plane tool holder can bemounted,allowing a significant increase in the number oftools to be mounted.In addition, up to4powerheadtoolholderscanbeinstalled. The 1st turret and 2nd turret can machine both the 1st spindle and 2nd spindle simultaneously,allowing for higher machining efficiency. Byoverlapping control ofthe2nd spindles movementcommandwhich can move in theX/Z direction,with the 1st turret's axis movementcommandmachiningtime can besignificantlyreduced.

product Consulting

TX800-8/10DIY

Double Spindle Power Turret with Y-axis CNC Lathe

The dual-spindle single turret Y-axis function is suitable for processing both ends at one time. It is equipped with an 8-inch main spindle and a 6-inch sub-spindle, a filtration system, a cooling system, and a drainage system. The 10-inch control system panel is easy to operate and is equipped with a handwheel manual control for higher efficiency.

product Consulting

DS-5-DI

Double Spindle Gang Type CNC Lathe (Stand Column Type, Tool Moving)

DS-DI Dual Spindle Series Dual Spindle Dual Channel CNC Lathe The machine tool is equipped with a sub-spindle and a sub-tool holder to realize the secondary processing of the workpiece rotating and docking, and reduce the time of secondary clamping. The system is equipped with dual-channel functions to realize simultaneous processing of the main and counter spindles, eliminating the trouble of secondary processing and greatly improving production efficiency Can be equipped with fully automatic feeder and product collection device to realize fully automated production management The transmission part of the machine tool adopts the high-precision P3 ball screw of the well-known Taiwan brand HIWIN/PMI, and adopts the 35-type linear guide with stronger rigidity The main shaft adopts Taiwan high-precision main shaft, the main shaft flange can be directly installed ∮160 three-jaw self-centering hydraulic chuck or other elastic chuck Spindle motor adopts servo motor, performance is more optimized Spindle parts are imported from Japan, Taiwan, etc.

product Consulting

DS-5-DII

Double Spindle Gang Type CNC Lathe (Flat Bed, Tool Fixed)

The machine tool is equipped with a dual-channel control system to process two different parts (or the same parts) at the same time, such as drilling. Dual spindle processing means synchronous processing. Gang tool loading has a fast response speed.

product Consulting

DS6/8-DIIS

Double Spindle Double Gang Type CNC Lathe

Power tool with single drive mechanism can be mounted in all positions Maximum torque of25Nm for heavydutycuttinglncreasednumberoftools2ndturretthatcan beequipped with. The number oftoolmounting faces has been increased to 8from on previous modelsIn addition. a double planetool holdercan be mounted,allowing a significantincrease in the number oftools to be mounted Inaddition,upto4powerheadtoolholderscanbeinstalled. The 1st turret and 2nd turret can machine both the 1st spindleand2ndspindle simultaneously,allowing for higher machining efficiency. By overlappine control of the 2nd spindes movement commandwhich can move in the X/Z direction with the 1st turret'saxis movementcommand machiningtime can besignificantly reduced.

product Consulting

Ready To Experience The Precision And Quality Of DAS CNC Machine?

%{tishi_zhanwei}%

SAF Coolest v1.3.1.2 设置面板GAGSE-ZGYF-JAAZE-ZAZ

无数据提示

Sorry, the current section is being updated, so stay tuned!

You can view other sections or return to Home Page

V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用

Need Help? Send Message

Submit